Please see the respective products for standard production parameters. Production outside these parameters is possible in on a case-by-case basis and after consultation.
The pattern’s message and parameters may vary for different degrees of thickness (esp. above 1.5 mm) and batches.

• Product sample: Material samples provided by ProMetall are for advertising purposes and cannot be used as control samples for deliveries. In the event this is a project or product-related wish of the customer, a prior agreement must be made with ProMetall.
• Product images: The surfaces are not always depicted true to scale!
• Advertising material and samples: Any consultation and background information is provided by ProMetall, its subsidiaries, agents and representatives, in brochures, catalogues, internet and other advertising material of any kind, after careful examination and to the best of their knowledge. We took particular care to ensure that the information provided is correct and in line with the respective latest information available. Any consultation or background information specified does, however, not constitute the subject of contractual agreements: it should not be considered a guarantee commitment for products and/or services, and it can and should not make assurances regarding product characteristics, such as suitability for certain applications. Any liability for incorrect information, in particular, typographical errors and errors of transcription, is excluded.
• Protective film: Unless otherwise agreed, ProMetall products are protected by means of standard film. For further information regarding this film, we refer to the information and guarantees provided by the manufacturers which can be provided upon request. If you have specific requirements regarding the film, we recommend you contact the manufacturer directly and, if necessary, agree a type of film with ProMetall.

ColourTex® procedure: In the course of colouring stainless steel sheets ProMetall selects the required raw materials with great care. In the event of slight, specific deviations, minimal nuances regarding colour uniformity may occur. This is minimised by means of precise adjustment of patterns, production in accordance with quality standard ISO 9002 and alignment of the installation. If a larger quantity of coloured stainless steel surfaces is applied, we recommend producing colour and surface patterns first to define the ColourTex® product’s colour and appearance as clearly as possible.